September 22, 2009

Care Of The Rising Dough Part 2

Placing the bowl containing the dough mixture in a larger vessel of hot water is a simple and satisfactory way of obtaining a uniform temperature, being especially desirable for a...
Home » Breads and Recipes » Care Of The Rising Dough Part 2



Placing the bowl containing the dough mixture in a larger vessel of hot water is a simple and satisfactory way of obtaining a uniform temperature, being especially desirable for a sponge in the quick-process sponge method. The water in the large vessel should be at a temperature of about 110 to 115 degrees Fahrenheit. After the bowl of sponge or dough is placed in the water, the large vessel should be covered very carefully, so that the heat from the water will be retained. To maintain the temperature in the vessel and thus keep it right for the bread mixture, the hot water has to be replenitheyd occasionally. If this is done, the sponge or dough will be maintained at a temperature of about 90 degrees and will therefore rise rapidly.

To insure the best results with the rising of bread mixtures, it is advisable, for the beginner at least, to use a thermometer for determining the temperature of air or water, as this instrument will save considerable time until experience in judging such matters has been gained. A Fahrenheit thermometer is the ideal kind for use in bread making. It can be used outside the bowl to maintain a temperature of 75 to 90 degrees in the dough when the plan mentioned in Art. 48 for keeping dough at a uniform temperature is followed. In addition, the oven temperatures for baking bread and rolls, which are explained later, are also shown. The temperature of water can, however, be determined fairly accurately with the hands. If it feels very warm but does not burn the hand, it may be considered at about a temperature of 110 to 115 degrees.

In order to prevent the formation of a hard surface on the dough, the bowl in which it rises should be kept tightly covered. A further means of preventing this condition consists in oiling the surface of the dough; that is, brushing it lightly with melted fat. In case a crust does form, it should be well moistened with water or milk and allowed to soften completely before the next kneading is begun.

Time Required For Rising.–No definite rule can be given for the length of time required for dough to rise, for this depends entirely on the activity of the yeast. If the yeast is active, the dough will rise quickly; but if it is not of good quality or if it has been killed or retarded in its growth by improper handling, the dough will rise slowly. Usually, dough should be allowed to rise until it has doubled in bulk. A good way in which to determine when this takes place is to put a small piece of the dough in a glass, such as a measuring glass, a tumbler, or a jelly glass, and mark on this glass where the dough should come when it has increased to twice its size. This glass set beside the vessel containing the dough will show when it has risen sufficiently.

Recommended Reading

  1. Care Of The Rising Dough
  2. PURPOSE OF RISING.--Rising is an important part of the process of bread making, no matter which method is employed. In...
  3. Making The Dough Preliminary Part 2
  4. The long-process straight-dough method is a shortened form of the method just explained. It does away with the necessity of...
  5. Making The Dough Preliminary
  6. The first step in bread making, and without doubt the most important one, is the making of the dough. It...
  7. Kneading And Shaping The Dough Part 2
  8. SHAPING THE DOUGH INTO LOAVES After the dough is properly kneaded in the manner just explained, it is placed in...
  9. Basics About Yeast Part 2
  10. Commercial yeast is placed on the market in two forms--moist and dry. Each of these yeasts has its advantages, so...

Leave a Comment

Fields marked by an asterisk (*) are required.